Konica Minolta bizhub 362 User Manual page 36

Before use
No. Part name
7 [Reset] key
8 [Interrupt] key
9 [Power] (auxiliary pow-
er) key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 [Proof Copy] key
14 Keypad
15 [C] (clear) key
16 [Mode Check] key
17 [Utility/Counter] key
18 [Mode Memory] key
19 Contrast dial
20 [Enlarge Display] key
21 [Accessibility] key
Reminder
Do not apply extreme pressure to the touch panel, otherwise it may be
scratched or damaged.
Never push down on the touch panel with force, and never use a hard or
pointed object to make a selection in the touch panel.
362/350/282/250/222
Description
Press to clear all settings (except programmed settings)
entered in the control panel and touch panel.
Press to enter Interrupt mode. While the machine is in
Interrupt mode, the indicator on the [Interrupt] key lights
up in green and the message "Now in Interrupt mode."
appears on the touch panel. To cancel Interrupt mode,
press the [Interrupt] key again.
Press to turn the control panel on or off. When the [Pow-
er] (auxiliary power) key is turned off, the machine enters
a state where it conserves energy.
Press the [Stop] key while a Fax function is selected to
stop the fax transmission.
Press to begin the operation selected in the Box, Fax,
Scan or Copy mode. If a Fax function is selected, the fax
transmission begins. When the machine is ready to start
the operation, the indicator on the [Start] key lights up in
green. If the indicator on the [Start] key lights up in or-
ange, the operation cannot begin.
Lights up in green when the machine is turned on with
the main power switch.
Press to print a single proof copy to be checked before
printing a large number of copies. This key is not availa-
ble in Fax mode.
Use to type in numbers. These keys can be used when
storing telephone numbers or other data. They can also
be used to type in the number of copies to be produced,
the zoom ratio, and the various settings.
Press to erase a value (such as the telephone number,
the number of copies, a zoom ratio, or a size) entered
using the keypad.
Press to display screens showing the specified settings.
Press to display the Utility/Counter screen.
Press to register (store) the desired copy settings as a
program or to recall a registered copy program. This key
is not available in Fax mode.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the Accessibility Settings screen. For
details, refer to the User's Guide [Copy Operations].
1
1-7