Output Tray Settings - Konica Minolta bizhub 362 User Manual

Utility mode
4
Select a tab, and then
select a parameter to be
set.
5
Specify the desired settings, and then touch [Enter].
– To cancel changes to the settings, touch [Cancel].
"Output Tray Settings" is available on tab 5/6, and "Default Screen" is
available on tab 6/6.
Note
To exit the User's Choice screens, touch [Enter] in each screen until the
standby screen appears.

Output Tray Settings

Tab Parameter
5/6
362/350/282/250/222
Description
Port 1 Select the exit tray for data
received at the fax port.
Port 2 Select the exit tray for data
received at port 2 when
the multi port is installed.
Network Select the exit tray for data
received from the network.
Printer Specify the exit tray for
computer printouts.
Copies Specify the exit tray for
copies.
10
Default Setting
1 (output tray 1)
1 (output tray 1)
1 (output tray 1)
1 (output tray 1)
2 (output tray 2)
1 (output tray 1)
10-11