Specifying Settings To Limit The Use Of Communication Modes-3/ Specifying Restrictions For Registering Fax Addresses And Printing Reports And Specifying How One-Touch Dial Recipients Are Displayed (Mode 477) - Konica Minolta bizhub 362 User Manual

10
Bit
2
1
0
Specifying settings to limit the use of communication modes–3/Speci-
fying restrictions for registering fax addresses and printing reports and
specifying how one-touch dial recipients are displayed (mode 477)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Specify whether or not fax addresses can be registered and reports can be
printed by users, and specify whether or not one-touch dial information is
displayed in screens and reports.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
10-98
Description Setting
Specifies whether or 0
not the use of the In-
1
ternet fax operation
is prohibited.
Specifies whether or 0
not the use of IP re-
1
lay is prohibited.
Specifies whether or 0
not the use of IP ad-
1
dress fax operation
is prohibited.
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
362/350/282/250/222
Utility mode
Page Refer-
ence
----------
----------
----------