Specifying Report Output Settings (Report Settings); To Specify The Result Report Printing Conditions (Tx Report) - Konica Minolta bizhub 362 User Manual

10

10.17 Specifying report output settings (Report Settings)

Specify the conditions for printing transmission result reports and activity re-
ports.
Settings can be specified for the following.
Parameter
TX Report
Activity Report
!
Detail
If "Activity Report" is set to "ON", the activity report contents can be out-
putted as a CSV file and sent by e-mail to the administrator when the ac-
tivity report is printed. To manage the contents of the activity report as
data, specify the e-mail address of the administrator.
For details on specifying the e-mail address of the administrator, refer to
"Administrator Management 1 screen" on page 10-19.

To specify the result report printing conditions (TX Report)

1
After entering Administrator mode, touch [Admin. 1].
2
Touch [Report Settings].
10-50
Description
Select how the result report for one recipient and for two or
more recipients is printed.
ON: Select this setting to print the report, regardless of the
transmission result.
If TX Fails: Select this setting to print the report if the trans-
mission failed.
OFF: Select this setting to not print the report, regardless of
the transmission result.
Specify whether or not to automatically output the activity re-
port with every 50 transmissions.
Utility mode
362/350/282/250/222