Registering/Deleting A Secondary Destination - Konica Minolta bizhub 362 User Manual

Registering/specifying settings

Registering/deleting a secondary destination

In addition to the main destination, a secondary destination can be regis-
tered with the one-touch dial button in case the transmission to the main
destination failed.
1
Perform steps 1 through 4 of the procedure for registering a one-touch
dial button, until the screen for selecting a one-touch dial button ap-
pears.
– For details, refer to "Programming a one-touch dial button with a
fax number" on page 9-5.
2
Touch the one-touch dial button where the secondary destination is to
be registered.
3
Touch [One-Touch], then [Sub Address Registration].
– If a secondary desti-
nation is already reg-
istered, touch
[Switch Sub/Main
Addresses] to switch
the secondary and
main destinations.
4
Enter the secondary
destination information,
and then touch [Enter].
– If a secondary desti-
nation is already reg-
istered, check the
settings that appear,
and then touch
[Change Settings] or
[Delete].
– If the secondary des-
tination is being de-
leted, a confirmation message appears. Touch [Yes].
5
Touch [Enter] until the standby screen (initial screen) appears.
362/350/282/250/222
9
9-15