Specifying Settings To Limit The Use Of Communication - Konica Minolta bizhub 362 User Manual

8
Specifying settings to limit the use of communication modes–1
(mode 475)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not
normally be displayed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7
6
5
4
3
8-26
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of
1
TCP/IP is prohibit-
ed.
Specifies whether or 0
not the use of LPD is
1
prohibited.
Specifies whether or 0
not the use of a
1
RAW port is prohib-
ited.
Specifies whether or 0
not the use of SLP is
1
prohibited.
Specifies whether or 0
not the use of a
1
Scan to FTP is pro-
hibited.
Specifying management settings
Description
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
bizhub 362/282/222
Page Refer-
ence
----------
----------
----------
----------
----------