Specifying The Setting For Selecting Paper When Printing Received Documents (Mode 008) - Konica Minolta bizhub 362 User Manual

10
Specifying the setting for selecting paper when printing received
documents (mode 008)
Specify the settings for selecting paper when printing received documents.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5, 4, 3
2, 1, 0
10-80
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies how to de- 0
termine whether or
not there is paper.
(Available only when
1
printing received
documents.)
Specifies the paper 0000
size according to the
received image.
(Available only when
printing received
documents.)
0100
1000
Others
----------------------- 000
Description
Paper priority method
(determined by whether
or not there is paper)
Tray paper method (de-
termined by the tray pa-
per size setting or the
previous paper informa-
tion, regardless of wheth-
er or not there is paper)
Automatically selects the
appropriate paper ac-
cording to the length and
width of the transmitted
document.
Does not select paper
with a width larger than
the width of the transmit-
ted document.
Selects paper with a
width that is the same as
the width of the transmit-
ted document.
*Do not specify any set-
tings other than those
mentioned above when
specifying settings for
this function.
*Do not change these bits
when specifying settings
for this function.
362/350/282/250/222
Utility mode
Page Refer-
ence
p. 3-6
p. 3-6
----------