Registering/specifying settings
Specifying the transmission speed
1
Perform steps 1 through 8 of the procedure for registering a one-touch
dial button, until the screen for entering the number appears.
–
For details, refer to "Programming a one-touch dial button with a
fax number" on page 9-5.
2
Use the keypad to type
in the telephone number
of the recipient, and then
touch [Speed].
3
Touch [
to select the desired
transmission speed, and
then touch [Enter].
4
Touch [Next].
5
Check the information to be registered, and then touch [Enter].
–
To change a setting, touch the button for the setting to be changed,
and then specify the new setting.
6
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
362/350/282/250/222
] or [
]
9
9-11