Using The Search Screen - Konica Minolta bizhub 362 User Manual

Transmission
5
Check the settings, and then press the [Start] key.
Scanning of the document begins, and then the document is sent.
If a transmission time was specified, the document is saved in the
memory and is sent at the specified time.
Note
To stop the transmission, press the [Stop] key. For details, refer to "Stop-
ping the transmission" on page 2-37.
If software switch settings were specified to prevent broadcast transmis-
sions, a fax cannot be sent with a program button programmed with mul-
tiple recipients. For details on the software switch settings, refer to
"Specifying software switch settings (machine functions)" on
page 10-69.

Using the Search screen

From the Search screen, a programmed one-touch dial button can be
searched for.
1
Press the [Fax/Scan] key to display the Fax mode screen.
– The recipient must have been registered with a one-touch dial but-
ton in advance. For details, refer to "Programming a one-touch dial
button" on page 9-5.
– If desired, touch [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Specifying the transmis-
sion settings" on page 2-10. For details on the settings available on
the FAX Menu screen, refer to "Useful transmission functions" on
page 6-3.
362/350/282/250/222
2
2-23