Stamping Faxed Documents ("Stamp" Function); To Stamp Faxed Documents - Konica Minolta bizhub 362 User Manual

Facsimile operations
Hide thumbs Also See for bizhub 362:
Table of Contents

Advertisement

6
6.9

Stamping faxed documents ("Stamp" function)

After specifying that a stamp be added to faxed documents, each page of
the document can be checked to determine whether or not it has been
scanned. Document pages that have not been stamped must be sent again.

To stamp faxed documents

0 In order to use the "Stamp" function, optional stamp unit must be in-
stalled.
0 When the "Stamp" function is selected, the document should be loaded
into the ADF. Transmission is not possible by positioning the document
on the original glass.
0 The "Stamp" function cannot be used together with the "2-Sided TX"
function.
0 The "Stamp" function is not available when copying.
1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Touch [FAX Menu].
3
Touch [Set 2], and then
touch [Stamp].
4
Select the stamping po-
sition, and then touch
[Enter].
6-20
Useful transmission functions
362/350/282/250/222

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 350Bizhub 282Bizhub 222Bizhub 250

Table of Contents