Konica Minolta bizhub 362 User Manual page 101

4
Symptom
Faxes cannot be received auto-
matically.
Black streaks appear through
the printout of the received fax.
4-6
Cause
Is the machine set to receive
faxes manually?
Is the memory full?
Is the telephone line correctly
connected?
Did an alarm appear?
Was the fax sent with an incor-
rect SUB for the F code?
Is there a problem with the tele-
phone connection or with the
caller's fax machine?
Troubleshooting
Remedy
Set the machine to auto-
matic reception.
Load paper if it is empty,
and then print the faxes
stored in the memory.
Check the telephone line
connection. If it is discon-
nected, connect it.
Follow the instructions
that appeared, and then
cancel the alarm.
If an incorrect SUB is re-
ceived while a confidential
box is being used, a trans-
mission error occurs and
the fax cannot be re-
ceived. Check the SUB
setting on the sender's fax
machine.
Check that the machine
can make clean copies. If
no black streaks appear,
have the caller send the
fax again.
362/350/282/250/222