Specifying Settings For The Information Indicated In The Report For Ip Relay Transmissions (Mode 368) - Konica Minolta bizhub 362 User Manual

10
Specifying settings for the information indicated in the report for IP relay
transmissions (mode 368)
Specify whether or not the results of IP relay transmissions are indicated in
the reception report.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5, 4, 3, 2
1
0
10-94
7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 (HEX: C2)
Description Setting
----------------------- 1
Specifies the valid 1
range of administra-
tor passwords.
*Regardless of the
setting specified for
this bit, this machine
is set to normally re-
quire the administra-
tor password with
the machine and
with PageScope
Web Connection.
----------------------- 0000
Specifies whether or 0
not the results of
1
scan transmissions
are indicated in the
transmission report.
Specifies whether or 0
not the results of IP
1
relay transmissions
are indicated in the
reception report.
Description
*Do not change this bit
when specifying settings
for this function.
The administrator pass-
word is required with this
machine and with Page-
Scope Web Connection.
*Do not change these bits
when specifying settings
for this function.
Not indicated
Indicated
Not indicated
Indicated
362/350/282/250/222
Utility mode
Page Refer-
ence
----------
----------
----------
----------
p. 12-7