Specifying The E-Mail Mode Settings - Konica Minolta IF-118 User Manual

3

Specifying the E-mail Mode Settings

This function specifies the default settings for the Basic and Advanced
transmission modes when sending a document by Internet fax (using the
10-key pad to enter the destination).
There are two transmission modes: Basic and Advanced. These can be
used to specify the maximum size, the maximum resolution, and the
encoding method to be used when sending a document.
Function
Maximum TX Size
Maximum Resolution
Coding Method
If an Internet fax is sent using a size, resolution, or coding method that is
not supported by the device receiving the document, the recipient may not
be able to read the document. When sending a document by Internet fax,
the settings should be specified according to the receiving device. If these
settings are specified correctly, the document will be sent with the settings
appropriate for the recipient even if the settings are set when the job is
sent.
1
From the "E-MAIL SETTING 1 "
menu in the Utility mode, press the
[8] key on the 10-key pad to select
"E-MAIL MODE".
2
Press the
select the scan mode ("BASIC" or
"ADVANCED"), and then press the
[YES] key.
❍
If "ADVANCED" is selected, the screen for specifying the
maximum size of document that can be sent appears. (Go to step
3.)
❍ If "BASIC" is selected, the E-MAIL SETTING 1 screen appears
again.
3-16
Description
Basic Mode
Inch models: LT
Metric models: A4
Fine
MH
and keys to
Getting Ready
Advanced Mode
×
Inch models: LT, 11 17
Metric models:A4, B4, A3
Fine, S/F (Superfine)
MH, MR, MMR
IF-118