Using A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

2

Using a one-touch dial button

If a recipient has been registered with a one-touch dial button, the recipient's
fax number can be dialed simply by pressing the programmed one-touch dial
button.
1
Press the [Fax/Scan] key to display the Fax mode screen.
– The recipient must have been registered with a one-touch dial but-
ton in advance. For details, refer to "Programming a one-touch dial
button" on page 9-5.
– If desired, touch [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Specifying the transmis-
sion settings" on page 2-10. For details on the settings available on
the FAX Menu screen, refer to "Useful transmission functions" on
page 6-3.
2
Touch [One-Touch].
3
Touch the desired one-touch dial button.
– Touch the index tabs and [←] and [→] to find the desired one-touch
dial button.
– If an incorrect recipient was selected, touch the button again to
deselect it.
The selected button is highlighted. To select multiple recipients, con-
tinue selecting the desired one-touch dial buttons.
4
Load the document.
2-20
Transmission
362/350/282/250/222