Fax Settings - Tx/Rx Settings; Fax Settings - Function Settings; Function On/Off Setting - Destination Check Display Function; Memory Rx Setting - Konica Minolta bizhub 501 Network Operating Instructions

10
10.5.8

Fax Settings - TX/RX Settings

For the setting procedure, refer to "Fax Settings - TX/RX Settings" on page 10-25.
!
Detail
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".
The available tray types vary depending on the options that are installed.
10.5.9

Fax Settings - Function Settings

Function ON/OFF Setting - Destination Check Display Function

For the setting procedure, refer to "Function ON/OFF Setting - Destination Check Display Function" on
page 10-32.

Memory RX Setting

For the setting procedure, refer to "Memory RX Setting" on page 10-33.
10.5.10

Fax Settings - Report Settings - Output Settings

Activity Report

For the setting procedure, refer to "Activity Report" on page 10-39.

TX Result Report

For the setting procedure, refer to "TX Result Report" on page 10-39.

Sequential TX Report

For the setting procedure, refer to "Sequential TX Report" on page 10-40.

Broadcast Result Report

For the setting procedure, refer to "Broadcast Result Report" on page 10-42.

TX Result Report Check

For the setting procedure, refer to "TX Result Report Check" on page 10-43.

Network Fax RX Error Report

% Specify the output setting for the network fax RX error report. Select the option to output or not to
output.
10-50
Administrator mode settings
bizhub 501/421/361 (Version 2)