Fax Settings - Tx/Rx Settings; Fax Settings - Function Settings; Function On/Off Setting - Destination Check Display Function; Memory Rx Setting - Konica Minolta bizhub 751 User Manual

10
10.5.8

Fax Settings - TX/RX Settings

For the setting procedure, refer to "Fax Settings - TX/RX Settings" on page 10-26.
!
Detail
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".
The available tray types vary depending on the options that are installed.
10.5.9

Fax Settings - Function Settings

Function ON/OFF Setting - Destination Check Display Function

For the setting procedure, refer to "Function ON/OFF Setting - Destination Check Display Function" on
page 10-33.

Memory RX Setting

For the setting procedure, refer to "Memory RX Setting" on page 10-34.
10.5.10

Fax Settings - Report Settings - Output Settings

Activity Report

For the setting procedure, refer to "Activity Report" on page 10-41.

TX Result Report

For the setting procedure, refer to "TX Result Report" on page 10-41.

Sequential TX Report

For the setting procedure, refer to "Sequential TX Report" on page 10-42.

Broadcast Result Report

For the setting procedure, refer to "Broadcast Result Report" on page 10-44.

TX Result Report Check

For the setting procedure, refer to "TX Result Report Check" on page 10-45.

Network Fax RX Error Report

% Specify the output setting for the network fax RX error report. Select the option to output or not to
output.
10-52
Administrator mode settings
bizhub 751/601 (Version 2)