Installation
NOTE
a
2-36
1. Make sure that all cables are firmly attached (except that the AC/
DC power supply should not be connected to the AC outlet yet).
Reference
Figure 2-7
2. Remove the platter to gain access to the interior lift handle. Grasp
the platter in the positions shown in
from the scanner. If the top edge of the platter is blocked, you may
find it easier to grasp the platter vertical bezel as shown in
27b.
Figure 2-27
illustrates an L-shaped weigh platter, which features a vertical
bezel. Your platter may not contain a vertical bezel.
Figure 2-27. Removing the Platter
and
Figure
2-26.
Figure 2-27
b
Magellan
and gently lift it
Figure 2-
(Obstruction)
Coin
®
8300/8400