Code 128 Transmit Function Characters
NOTE
6-294
Enables/disables transmission of Code 128 function characters 1, 2, 3,
and 4.
Disabled is the recommended setting for all interfaces.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 TRANSMIT FUNCTION CHARACTERS = DISABLE
CODE 128 TRANSMIT FUNCTION CHARACTERS = ENABLE
®
Magellan
8300/8400