How To Use This Manual - Datalogic MAGELLAN 8300 Product Reference Manual

How to Use This Manual

1-2
Chapter 6, Programming
ble feature and provides a dedicated set of bar codes for configuring scan-
ner and scanner/scale features. This chapter is organized by the categories:
General Features, Interface Related Features and Symbology Related Fea-
tures.
Appendix A, LED/Beeper Indications & Controls
ing the various functions and indications of the scanner/scale control
panel features.
Appendix B, Cable Information
specifications and pinout details for product cabling.
, is a set of bar codes representing the digits and char-
Appendix C, Keypad
acters required to enter extended programming data needed during certain
programming sessions.
Appendix D, Host Commands
commands that can be used with a compatible host interface.
Appendix E, Keyboard Function Key Mappings
board models, their defined protocol, scancode set, and some unique fea-
tures. Other tables in this chapter provide the function key maps
associated with each of the scancode sets.
Appendix F, Factory Defaults
for common interfaces.
Appendix G, Handheld Data Format Requirements
notes describing the general format of data accepted by the scanner
through the auxilliary port as transmitted from a handheld scanner.
Reference the first chapter of this manual for a general description of the
product's features and an outline of the manual's contents and organiza-
tion. View the remaining chapters for procedures regarding scanner or
scanner/scale installation, operation, maintenance, calibration and bar
code programming.
, highlights the function(s) of each programma-
, references wire requirements, connector
, furnishes a partial listing of available host
, summarizes the key-
, lists factory default programmable settings
Magellan
, contains tables describ-
, contains application
®
8300/8400