Codabar Stitching; Codabar Length 2 - Datalogic MAGELLAN 8300 Product Reference Manual

Codabar Stitching

NOTE
Product Reference Guide
Enables/disables stitching for Codabar labels. When parts of a Codabar
bar code are presented to the scanner with this feature enabled, the bar
code parts will be assembled by the scanner's software, and the data will be
decoded if all bar code proofing requirements are met.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
Codabar Stitching operates using fixed lengths ONLY.
and/or

Codabar Length 2

work.
CODABAR STITCHING = DISABLE
CODABAR STITCHING = ENABLE
must be properly configured for stitching to
Codabar Enable
Codabar Length 1
6-341