Upc-A Check Character Transmission - Datalogic MAGELLAN 8300 Product Reference Manual

Hide thumbs Also See for MAGELLAN 8300:

Table of Contents

UPC-A Check Character Transmission

Enables/disables transmission of a UPC-A check character.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

UPC-A CHECK CHARACTER TRANSMISSION = DISABLE

UPC-A CHECK CHARACTER TRANSMISSION = ENABLE

Show Quick Links

Table of Contents