Laser Timeout - Datalogic MAGELLAN 8300 Product Reference Manual

Hide thumbs Also See for MAGELLAN 8300:

Table of Contents

Laser Timeout

The laser timeout feature sets the time for switching the visible laser

diodes (VLDs) off if the scanner is idle. Using this feature can prolong the

life of the VLDs.

To set the Laser Timeout:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

LASER TIMEOUT = 5 MINUTES

Show Quick Links

Table of Contents