Code 39 Check Character Calculation - Datalogic MAGELLAN 8300 Product Reference Manual

Hide thumbs Also See for MAGELLAN 8300:

Table of Contents

Code 39 Check Character Calculation

Product Reference Guide

Enables/disables calculation and verification of an optional Code 39 check

character. When disabled, any check character in label is treated as a data

If check calculation is disabled, the risk is increased that a misread can

In particular, if you are using variable length stitching, it is important to use

check character calculation to prevent misreads.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

CODE 39 CHECK CHARACTER CALCULATION = DISABLE

CODE 39 CHECK CHARACTER CALCULATION = ENABLE

Code 39 Enable

Show Quick Links

Table of Contents