Double Read Timeout - Datalogic MAGELLAN 8300 Product Reference Manual

Hide thumbs Also See for MAGELLAN 8300:

Table of Contents

Double Read Timeout

The Double Read Timeout feature sets a time limit that determines how

much time must pass before reading the same label again (e.g. two identi-

cal items in succession).

To set the Double Read Timeout:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

If the incidence of multiple reads is not acceptable, increase the Double Read

Timeout setting to a higher value.

DOUBLE READ TIMEOUT = 400ms

DOUBLE READ TIMEOUT = 600ms

Show Quick Links

Table of Contents