Ibm Maximum Label Slice Length - Datalogic MAGELLAN 8300 Product Reference Manual

IBM Maximum Label Slice Length

NOTE
6-102
Specifies the maximum allowable length of host transmit data in each
sliced frame.
This setting only applies when
1. Scan the SWITCH bar code.
2. Scan the bar code below,
. You'll need to cover any unused bar codes on this and the
LENGTH
facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired slice length. The selectable range is a length from
14 to 246. Pad all single and double digit numbers with leading
zeroes to yield a three-digit entry (014-100).
4. The scanner will automatically exit Programming Mode when the
appropriate amount of digits have been scanned.
SET IBM MAXIMUM LABEL SLICE LENGTH
IBM Label Slicing Control
SET IBM MAXIMUM LABEL SLICE
Magellan
is enabled.
that rep-
Appendix C
®
8300/8400