Auxiliary Port Baud Rate - Datalogic MAGELLAN 8300 Product Reference Manual

Auxiliary Port Baud Rate

NOTE
6-26
Specifies the baud rate of the auxillary port when operating in PIR/CT
mode.
PIR/CT is a value-added feature which may not have been activated on your
model.
To specify the Auxiliary Port Baud Rate:
1. Scan the SWITCH bar code.
2. Scan the desired baud rate from the bar codes below and on the
immediately following pages. You'll need to cover any unused bar
codes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
AUXILIARY PORT BAUD RATE = 1200
AUXILIARY PORT BAUD RATE = 2400
®
Magellan 8300/8400