Codabar Check Character Transmission
NOTE
6-334
Enables/disables transmission of an optional Codabar check character.
Applies only when
Codabar Check Character Calculation
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR CHECK CHARACTER TRANSMISSION = DISABLE
CODABAR CHECK CHARACTER TRANSMISSION = ENABLE
is enabled.
®
Magellan
8300/8400