I 2 Of 5 Length 1 - Datalogic MAGELLAN 8300 Product Reference Manual

I 2 of 5 Length 1

Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode (see
Length includes the barcode's check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired label length. The selectable range for this option is
002 to 050, even numbers only. Pad all single and double digit
numbers with leading zeroes to yield a three-digit entry (002-050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
Interleaved 2 of 5 (I 2 of 5) Enable
I 2 of 5 Length
SET I 2 of 5 LENGTH 1
SET I 2 of 5 LENGTH 1
.
Control)
below. You'll need to
that rep-
Appendix C
6-311