Set Mode; Set Mode ProgrammNg - Icom IC-GM651 Instruction Manual

7

SET MODE

n Set mode programming
Set mode s used to change the condtons of the trans-
cever's functons: Scan type, Scan resume tmer, Beep tone,
Internal speaker, Dsplay contrast, Mcrophone type and
Cursor movement.
Avalable functons may dffer dependng on dealer set-
tng.
NOTE: The transcever automatcally returns to the nor-
mal operaton condton when no operaton s performed
for 1 mnutes n Set mode.
106
q Whle pushng and holdng [⁄6 • C], push [POWER] to
enter Set mode.
• Turn power OFF n advance.
w After the dsplay appears, release [⁄6 • C].
e Rotate [SELECTOR] to select the desred tem, push
[ENT].
r Rotate [SELECTOR] to select the desred condton of the
tem, push [ENT] to set.
t Push [CLR], or rotate [SELECTOR] to select "Exit"
then push [ENT] to ext Set mode and returns to normal
condton.
• SET MODE CONSTRUCTION
Rotate ˘Scan Type
Scan Timer
Beep
SELECTOR
Internal Speaker
Display Contrast
MIC
Cursor
Exit
--Set Mode--
Movement ≥