Icom IC-GM651 Instruction Manual page 73

r Input your lattude data drectly wth the keypad. After n-
puttng, push [ENT] to set.
• If the data s not necessary to change, push [ENT] to skp the
nput step.
• Push [6• ] to nput N; North lattude or [7•
MNO
S; South lattude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the poston and tme data. (p. 66)
• Push [CLR] to cancel and back to the prevous condton.
Push
--DSC Menu--
Input Latitude
34°34.506N
Input your latitude data
--DSC Menu--
CLR
Input Latitude
25°25.506N
Rotate
Cursor moves
SELECTOR
--DSC Menu--
Input Latitude
25°25.415N
Push
or
* This illustration shows that the transceiver does not receive
the position data from the connected GPS receiver. If the
transceiver has no position data, '_' (under bar) is indicated.
] to nput
PRS
1st digit blinks
Set 'N' (North) or
'S' (South)
Push
t Input your longtude data drectly wth the keypad. After
nputtng, push [ENT] to set.
• If the data s not necessary to change, push [ENT] to skp the
nput step.
• Push [9• ] to nput W; West longtude or [3•
WXY
E; East longtude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the poston and tme data. (p. 66)
• Push [CLR] to cancel and back to the prevous condton.
1st digit blinks
Push
--DSC Menu--
Input Longitude
123°23.236W
Input your longitude data
CLR
--DSC Menu--
Input Longitude
Rotate
154°13.236W
Cursor moves
SELECTOR
--DSC Menu--
Input Longitude
154°11.106W
Push
or
* This illustration shows that the transceiver does not receive
the position data from the connected GPS receiver. If the
transceiver has no position data, '_' (under bar) is indicated.
6
DSC OPERATION
] to nput
DEF
Set 'W' (West) or
'E' (East)
Push
☞Contnue to the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65