Icom IC-GM651 Instruction Manual page 43

r Input your longtude data drectly wth the keypad (f you want to
change the dsplayed data). After nputtng, push [ENT] to set.
• If the data s not necessary to change, push [ENT] to skp the
nput step.
• Push [9• ] to nput W; West longtude or [3•
WXY
E; East longtude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the poston and tme data. (p. 36)
• Push [CLR] to cancel and back to the prevous screen.
1st digit blinks
Push
--DSC Menu--
Input Longitude
123°23.236W
Input your longitude data
CLR
--DSC Menu--
Input Longitude
Rotate
154°13.236W
SELECTOR
--DSC Menu--
Input Longitude
154°11.106W
Push
or
* This illustration shows that the transceiver does not receive
the position data from the connected GPS receiver. If the
transceiver has no position data, '_' (under bar) is indicated.
] to nput
DEF
Cursor moves
Set 'W' (West) or
'E' (East)
Push
t Input the current UTC tme data drectly wth the keypad
(f you want to change the dsplayed data). After nputtng,
push [ENT] to set.
• If the data s not necessary to change, push [ENT] to skp the
nput step.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the poston and tme data. (p. 36)
• Push [CLR] to cancel and back to the prevous screen.
1st digit blinks
Push
--DSC Menu--
Input UTC Time
12:00
Input the current UTC time
CLR
--DSC Menu--
Input UTC Time
Rotate
12:1_
Cursor moves
SELECTOR
--DSC Menu--
Input UTC Time
12:15
* This illustration shows that the transceiver does not receive
the UTC time data from the connected GPS receiver. If the
transceiver has no time data, '_' (under bar) is indicated.
6
DSC OPERATION
Push
☞Contnue to the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
35