No Dial Tone; No Caller Id; Handset Doesn't Work; Problems Dialling - Talkswitch TS-600 User Manual

Hide thumbs Also See for TS-600:

Table of Contents

T S - 6 0 0 U S E R G U I D E

• Verify that the TalkSwitch is properly programmed for your extension's

call handling.

• Verify that Do Not Disturb is disabled for your extension.

NO DIAL TONE

• Verify that the line cord is properly connected.

• Try with a different line cord.

• Test the telephone in a different jack. If it works, then the jack may be

defective or the TalkSwitch may be wired incorrectly.

• Check Caller ID subscription. In order to receive Caller ID for external calls,

you must be subscribed to the Caller ID service from your telephone

service provider.

• Verify that the coiled handset cord jack is fully inserted into the handset.

• Ensure that your setting for outside line access code, for example

for direct line access, matches the setting on the TalkSwitch.

• Verify that your extension is programmed in TalkSwitch as a TS-600.

• Verify that your extension is programmed in TalkSwitch as a TS-600.

• Verify that your extension is programmed in TalkSwitch as a TS-600.

2 2

H T T P : / / G LO B A L .T A L K S W I T C H . C O M

Table of Contents