Storing Frequently Used Settings In Programs - Oce 9800 User Manual

Storing frequently used settings in
programs
Groups of default printer settings can be stored in programs. Besides the
standard default settings, up to five extra groups of default settings can be
stored under the five program buttons. This section explains how to store
settings under a button, what feedback is provided on the display, and how to
erase programs.
The default settings are used for copy and print jobs.
Note:
When the Océ 9800 is installed, the `Default settings' program contains the
factory default settings. Refer to Appendix A for a complete overview.
Not all factory default settings are visible in the 'Default settings' area. The
area can contain up to 8 values. The most important settings are:
the number of copies
sort by set/sort by page
the selected roll number and whether Auto-roll is enabled or disabled. This
will be indicated as: (auto)
the zoom factor
copy delivery
print delivery (if applicable)
Other settings that can be displayed on the remaining 2 or 3 lines are:
synchro cut/standard cut
fold (always visible if enabled)
edit: mirror, shift, erase, stretch
stamp (always visible if enabled)
add strip/remove strip
exposure
original type: normal, photo, dark, blueprint (visible if enabled)
High Capacity Stacker bin number (if installed)
Changing the Océ 9800 default settings
Define the settings you wish to apply as defaults.
1
Press the section button 'Program'.
2
Select 'Store' using the higher/lower buttons.
3
94 Océ 9800 Copier/Printer User Manual