Defining Connectivity Settings - Oce 9800 User Manual

Quitting system administrator mode
Press the 'key' button.
1
Defining connectivity settings
The Océ 9800 supports several types of interfaces. During installation, your
Océ service engineer will define appropriate interface settings. If
communications parameters on your host system change over time, you can
use system administrator mode to define new connectivity settings.
You can change serial, Centronics, and SCSI communications parameters.
Defining a centronics connection
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select Centronics.
2
Specify normal or high speed.
3
When finished, quit system administrator mode.
4
Defining an SCSI connection
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select SCSI.
2
Specify the appropriate SCSI-id, using the numeric buttons.
3
If required, press the 'SCSI terminator' button to activate this option (black
4
background).
When finished, quit system administrator mode.
5
Defining an Ethernet connection
Open the 'Connection' card in the 'Connect' section.
1
Press the 'Select connection' button and select 'Ethernet'.
2
Specify the Ethernet-id, -mask and -router. Each parameter is specified with
3
four numeric fields displayed above one another. The lowest field represents
the first part of the Ethernet parameter.
Print Jobs 107