Setting The Reset Time - Oce 9800 User Manual

To select the current time:
Press the function button 'Time and Date'.
5
You can now adjust the hour displayed. Press the `Time and Date' function
6
button again to adjust the minutes displayed.
When finished, quit key operator mode.
7

Setting the reset time

If the scanner remains inactive for a given period of time (no buttons pressed
or originals fed), the scanner settings will return to their default values. This
period of time is called the reset time.
The factory default for reset time is 2 minutes, but this value can be changed
to any time between 1 and 99 minutes, or it can be de-activated entirely.
Setting the reset time
Access key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the 'Reset time' function button (see figure 82).
3
Copies: Ready to copy
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
Controller
On/Off-timer
[82] Reset time
Use the numeric or higher/lower buttons to set the required reset time,
4
or,
Press the function button to deactivate the function, thus forcing users to
5
manually reset the system.
When finished, quit key operator mode.
6
Key operator
................
................
Program
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Finishing Copy
Time:
12 00.
Date:
01 01. 95.
Automatic
Time and
feed
Date
89