Activating The Time Switch - Oce 9800 User Manual

Activating the time switch

The time switch function allows you to program the system to automatically
turn itself on at a specified time and off after a certain idle-time.
The advantages of this time switch are:
the system is ready for use at the start of the working day
energy-savings when the system is not being used.
Defining the switch on/off time and days
Access key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the 'On/Off timer' function button (see figure 83).
3
Copies: Ready to copy
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
Controller
On/Off-timer
[83] On/Off timer
Enter the required On/Off timer delay (hours/minutes) using the `higher/lower'
4
buttons.
Press the function button 'Work days'.
5
Enter the required working days using the 'higher/lower' buttons.
6
When finished, quit key operator mode.
7
Make sure that you turn the key to the `timer' position if you want the
Note:
machine to automatically be turned on.
90 Océ 9800 Copier/Printer User Manual
................
................
Program
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Finishing Copy
Time:
12 00
Date:
01 01 95
Automatic
Time and
feed
Date