Using Scan To File - Oce 9800 User Manual

Copies:
Ready to copy
0
Image
Special
original
Copy
material
......................................................................................................................................
Copy
size
[109] Removing a strip from the leading edge
If you want to remove the trailing edge, you can use the `Remove strip'
Note:
setting for the leading edge as described above, and feed in the original with
the trailing edge first. You can also define the original width and length.
Additional information about this setting can be found on page 72.
The 'Shift up' setting in the 'Image' card of the 'Copy' menu and the
Note:
Zoom settings on the operating panel of the Océ 9800 scanner may influence
the result of Scan To File. We recommend that you avoid using these settings
for Scan To File.

Using Scan To File

The following procedure describes how to use the Scan To File option.
Additional information can be found in the `Océ Scan Station User
Note:
Manual'.
Scanning an original with Scan To File
Start the Scan Station, define the required settings and press the 'Start' button
1
(on the Scan Station).
Press the `Scan' button on the main window of the Océ 9800 operating panel
2
to specify whether you want to send the scanned file to the printer:
with copy: The scanned original will be printed and it will be saved in a file
by the Scan Station.
without copy: The scanned original will be saved in a file by the Scan Station,
but will not be printed.
120 Océ 9800 Copier/Printer User Manual
................ ................
Machine
A4 >> A2
A3 >>
A2
210 mm
A2
A2 >>
A2
A1 >> Standard cut
A2
A0 >> Synchro cut
Auto format Copy
selection selection length
length
................
................
Program Finishing
Copy
4 mm 0 mm
0 mm
0 mm
Remove
Add
strip
strip