High Capacity Output Unit With Punch Unit (Optional) - Oce 9800 User Manual

Original size
A0 portrait
A1 landscape
A2 portrait
A3 landscape
[46] Afnor folding, how to feed originals and where to place legends
If your A1 original has a filing strip and you want to feed it into the
Note:
scanner in landscape orientation, you may insert the filing strip to the left of
the original guide.

High capacity output unit with punch unit (optional)

The optional high capacity output unit is equipped with either one (standard)
or two belts that offer a larger capacity and more flexibility. This output unit
delivers copies on belt 1 or belt 2. For maximum capacity, the two belts can be
linked so that the system automatically switches to the empty belt when the
first one is full. The copies are delivered offset stacked. You can adjust the side
guides of the belts, depending on the width of the fold package. The amount of
copy output to be delivered on the belts can be adjusted by your Océ service
technician.
An optional punching unit can be installed in the high capacity output unit, to
perforate your copies. Four-hole punching is standard. Your Océ service
technician can change the system to two-hole punching. Procedure 'Folding
copies' on page 53 describes how to activate the punch unit.
If you want to use a different folding length and folding width, you also
Note:
have to adapt the folding length and folding width in the punching unit (see
'Adjusting the punching unit' on page 56).
Selecting settings for high capacity output unit
Open the 'Fold delivery' card in the 'Finishing' section.
1
To select the desired delivery mode for copies made from paper originals
2
(using the scanner), press the function button 'Copy delivery' until the required
output position is selected (see figure 47).
Basic copy jobs
If Afnor folding has been selected:
How to feed originals and where to place legends
for Afnor folding
Portrait and legend in upper left-hand corner
Portrait and with legend in lower left-hand corner
Landscape and legend in lower left-hand corner
Portrait and with legend in lower left-hand corner (like
DIN)
55