Océ 9800 Controller Error Codes - Oce 9800 User Manual

Océ 9800 controller error codes
Controller errors are indicated by the appearance of an icon on the LCD screen
of the operating panel. Additional information on warnings is displayed in the
`Machine' menu.
There are 3 different types of recoveries for warnings:
Warnings related to a specific print file. Although these warnings will not
affect machine functioning, output will probably not be what the operator
expected (e.g. it may be clipped, or a set may be split into two or more sets).
The operator can reset the warning message via the `Machine' menu.
Operator Recoverable Warnings (ORW)
Most of these warnings indicate communication problems between host and
controller. The system administrator may have to change settings (e.g. rs232,
etc.). After changing settings as necessary, the system administrator can reset
the controller error by pushing the reset error soft key in the `Machine' menu,
which will clear all active controller errors. Activating this function will
re-activate all host<->controller communications which were de-activated
when the communication error was detected.
Machine Recoverable Warnings (MRW)
To recover from these warnings, the operator must first try to reset the entire
controller by pressing the reset controller soft key in the `Machine' menu.
Depending on the type of connection, it may be necessary to restart
Note:
printing from the host system.
If the machine does not recover, the operator must turn the machine off and
then on again.
166 Océ 9800 Copier/Printer User Manual