Reset Functions - Oce 9800 User Manual

Reset functions

The system administrator can make use of the following functions in the
`Machine' section:
Restore factory default settings
Reset controller
Restoring controller to factory default settings
use the Reset configuration function to undo all changes which may have been
made to the Océ 9800 controller settings.
Restoring factory default settings
Open the 'Controller' card in the 'Machine' section (see figure 105).
1
Copies:
Ready to copy
0
General
......................................................................................................................................
Controller
Test
print
[105] Controller card
Press the 'Reset config.' button.
2
Press the Start button to confirm.
3
All changes will be undone and the system will be restored to its default status.
When finished, quit system administrator mode.
4
Resetting controller
message, you can reset the entire controller without turning the printer off.
Resetting the printer controller
Stop the print application which is currently running on the host system
1
Open the 'Controller' card in the 'Machine' section (see figure 105).
2
114 Océ 9800 Copier/Printer User Manual
................ ................
Machine Program
Print
Folding Reset
length
settings config.
If a controller error cannot be solved by resetting an error
The system administrator can
...............
................
Language
Connect
Reset Reset Reset
controller
error