Removal Of Nicad Batteries - Oce 9800 User Manual

Removal of NiCad batteries

Two nickel-cadmium batteries containing substances which may pollute the
environment are fitted in this machine. After these batteries have been removed
from the machine, they should be disposed of in accordance with local laws
and regulations.
If you have an Océ maintenance contract, Océ service personnel will remove
the batteries and properly dispose of them, if required. If you do not have a
maintenance contract with Océ, battery removal should be carried out as
follows:
Removing NiCad battery from the cpu board
Océ accepts no liability for any damages resulting from removal
Attention:
of the battery by persons other than Océ service personnel.
Before removing the battery, turn off the machine and disconnect the power
1
supply.
Remove the cover at the left-hand side (see figure 163).
2
[163] Cover of the main engine
Loosen all connectors of the cpu-io board.
3
Loosen the screws of the printed circuit board assembly.
4
Remove the printed circuit board
5
Remove the blue plastic holder (containing the battery) from the printed circuit
6
board.
Safety information 181