High Capacity Stacker (Optional) - Oce 9800 User Manual

High Capacity Stacker (optional)

If a High Capacity Stacker is installed, copies can be ejected at the rear of the
printer into one of the six stacker bins. Each bin can stack up to 200 unfolded
copies.
Long copies and polyester copies
are collected under the stacker unit. If the Océ 9800 is equipped with a folder,
polyester copies are also delivered on the High Capacity Stacker. Otherwise,
polyester copies are delivered via the Lower Output.
An extra guide must be installed on bin 1 to ensure correct delivery of
Note:
long copies.
If the system is equipped with a folder, select bin 1 of the High Capacity
Note:
Stacker to deliver polyester copies, and guide the delivery by hand.
If 'Lower output' or 'Folding' is selected, copies are not delivered at the
Note:
High Capacity Stacker. See 'Lower Output' on page 62 and 'Folder (optional)'
on page 51 for additional information.
[51]
The upper bin (bin 1) cannot be moved. Bins 2 through 6 can be pulled out
(opened) 30 cm (approx 12") to facilitate emptying.
Indication 'Bin in use'
continuously, the bin is in use for copy delivery .the bin should not be opened.
58 Océ 9800 Copier/Printer User Manual
Copies which are longer than 122 cm (48")
If the indicator light next to a bin remains on