Entering Key Operator Mode - Oce 9800 User Manual

Entering key operator mode

In order to perform special key operator functions, you must first enter key
operator mode.
This functionality is restricted to dedicated key operators, and is protected by
an ACCESS code. Your service engineer configures the key operator ACCESS
code upon installation.
After performing key operator functions, be sure to quit key operator
Note:
mode to prevent improper use of the Océ 9800.
Entering key operator mode
Press the 'key' button (see figure 80).
1
You are requested to enter your ACCESS code.
Enter the key operator ACCESS code.
2
If the ACCESS code entered is correct, a key symbol is indicated in the scanner
display.
KEY
Copies:
Key operator access
0 Enter ACCESS code
CLEAR C = cancel
Time:
0: 0 0
Jobs:
0
[80] Entering key operator mode
Quitting key operator mode
Press the 'key' button.
1
Key operator
................ ................ ................
Machine Program Finishing
................
Copy
87