Oce 9800 User Manual page 141

[134] Crank.
If the media keeps coming, it is not cut and it must be manually cut.
7
Open the pre-heater section by pressing handle 1 down (see figure 135).
8
Pull the green catches 2 towards you and release handle 1 (see figure 135).
9
Pull the green bar 3 towards you (see figure 135).
10
2
[135] Opening of the pre-heater section
Cut the media and turn the crank clockwise to deliver the jammed media.
11
Refer to 'Clearing jammed media from the roll feed section' on page 142.
12
Remove the crank and return it to its original position.
13
Close as follows:
Push bar 3 to the rear.
1
Press handle 1 downwards.
2
Press catches (2) to the rear.
3
Close the bar of the fuser section.
4
Problem solving
2
3
1
141