Oce 9800 User Manual page 56

If the optional plot option is installed, you can make a separate selection for
3
copies that are sent to the printer by a computer system. To select a delivery
mode for these copies, press the function button 'Print delivery' until the
required output position is selected (see figure 47).
Copies:
Ready to copy
0
High cap.
stacker
Stamp
Fold
delivery
......................................................................................................................................
Fold
[47] Copy delivery on the high capacity output unit
Define any other settings as required.
4
Feed the original.
5
Adjusting the side guides of the belts
Loosen the fastening nuts (see figure 48).
1
[48] Adjusting the side guides of the belts
Adjust the plate in accordance with the width of the fold package.
2
Tighten the fastening nuts.
3
If you change the folding width and/or the folding length, you must also
Note:
adjust the punching unit.
Adjusting the punching unit
Open the door at the front of the High Capacity Output Unit.
1
56 Océ 9800 Copier/Printer User Manual
................ ................
Machine Program
Folding
length
................
................
Copy
Finishing
Belts Belts
Belt 2 Belt 2
Belt 1 Belt 1
Stack Stack
Copy
Print
delivery
delivery
width