Defining Default Language Settings - Oce 9800 User Manual

[98] Specifying Ethernet parameters
When finished, quit system administrator mode.
4
Defining default language settings
During installation, your Océ service engineer will define the appropriate
language settings for your particular system. If these settings change over time,
you can use system administrator mode to define new defaults.
The following default print settings are normally overruled by settings
Note:
that are sent along with the print job.
Language format
(languages). You can change the settings for Calcomp, HP-GL, HP-GL/2, and
ASCII.
Setting the default language format
Open the 'Formats' card in the 'Language' section (see figure 99).
1
Press the function button 'Select data format' to select the required language.
2
The ASCII and Calcomp settings are distributed over two windows.
Note:
Press the 'Select data format' button again to open the second window.
Define the appropriate settings.
3
When finished, quit system administrator mode.
4
108 Océ 9800 Copier/Printer User Manual
=
111.68.226.5
The Océ 9800 accepts print files in various data formats