Safety Instructions - Oce 9800 User Manual

Safety instructions

Océ machines and media have been developed and tested in conformance with
the strictest international safety standards. To guarantee the safe operation of
these products, it is important that you observe the following safety
recommendations:
Do not remove any screws from fixed panels.
Except for the components and maintenance materials mentioned in this
manual, the machine is not user-serviceable.
Do not place any liquids on the printer.
Use maintenance materials or other materials for their original purpose only.
Keep maintenance materials away from children.
Do not mix cleaning fluids or other materials.
To avoid risks, all modifications to Océ equipment are strictly reserved for
Océ service personnel. We recommend that you use only those copy-control
devices that comply with (inter)national standards regarding product safety
and radio-frequency interference, and that you use the attachment cables
specified by Océ.
The printer is equipped with an ozone filter. If your printer is covered under
an Océ maintenance contract, your Océ service technician will check this
filter regularly and replace it when necessary.
Correct operation is guaranteed only if the filter is replaced by Océ
personnel.
Do not move the printer yourself. Contact Océ Customer Service if you wish
to relocate the printer. If, for some reason, you have to move the printer
yourself, make sure that the electrical circuit breaker has the right fuse
capacity. See the Océ 9800 safety data sheet in this appendix for information
about fuses.
Do not bridge any mechanical or electrical circuit breakers.
Do not use an extension cord to connect the printer.
Place the printer close to an easily-accessible electrical power outlet.
The switch in the fixed connection (if any) should be easily accessible.
This printer is not designed for connection to an IT power system. (An IT
power system is a voltage network in which the neutral wire and safety earth
are separated.).
Do not block the printer's ventilation openings.
Make sure that the printer is placed on a sufficiently strong, level, horizontal
surface. See the Océ 9800 safety data sheet in this appendix for information
about the weight of the printer.
Safety information 173