Table of Contents
Advertisement
High capacity output unit with punch unit (optional)
The optional high capacity output unit has one (standard) or two belts that offer
a larger capacity and more flexibility. With this output unit you can have the
copies delivered on belt 1 or belt 2. For maximum capacity, the two belts can
be linked so that the system automatically switches to the empty belt when the
first one is full. The copies are delivered offset stacked. You can adjust the side
guides of the belts, depending on the width of the fold package. The amount of
copy output on the belts can be adjusted by the service technician.
An optional punch unit can be installed in the high capacity output unit to have
your copies perforated. Four-hole punching is standard. The service technician
can change the system to two-hole punching. Procedure 'Folding copies' on
page 53 describes how to activate the punch unit.
If you want to use a different folding length and folding width, you also
Note:
have to adapt the folding length and folding width in the punching unit (see
'Adjusting the punching unit' on page 56).
Selecting settings for high capacity output unit
Open the 'Fold delivery' card in the 'Finishing' section.
1
To select the delivery of copies that are made from paper originals (using the
2
scanner), press the function button 'Copy delivery' until the required output
position is selected (see figure 45).
If the optional plot option is installed, you can make a separate selection for
3
copies that are sent to the printer by a computer system. To select the delivery
of these copies, press the function button 'Print delivery' until the required
output position is selected (see figure 45).
Copies:
Ready to copy
0
High cap.
stacker
Stamp
Fold
delivery
......................................................................................................................................
Fold
[45] Copy delivery on the high capacity output unit
Make other settings as required.
4
Feed the original.
5
Basic copy jobs
................
Machine
Folding
length
................
................
Program
Finishing
Belts
Belt 2
Belt 1
Stack
Print
delivery
width
................
Copy
Belts
Belt 2
Belt 1
Stack
Copy
delivery
55
Advertisement
Table of Contents
