E-Mail Tx (Smtp); Sending Scan Data By E-Mail (With The Digital Signature Attached); Tcp/Ip Settings; Create A Certificate - Oce cm3522 User Manual

Setup items by operation
1.10

Sending scan data by E-mail (With the digital signature attached)

Specify settings for sending scan data by E-mail with the digital signature attached.
When scan data is sent by E-mail, it can be sent with the digital signature attached.
The certificate for this machine can be sent to the user by sending a message with the digital signature
attached. Users can encrypt the message to send to this machine using the received certificate.
Communication by combining POP before SMTP, APOP, SMTP authentication or encryption using SSL/TLS
is available. For details, refer to
Specify the settings according to the following flowchart.
Communicate with the SMTP
server using SSL/TLS?
Yes
SMTP over SSL/Start TLS
1.10.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
1.10.2

E-mail TX (SMTP)

Specify settings for sending messages.
For details, refer to
1.10.3

Create a certificate

Create a certificate for this machine.
For details, refer to
Océ cm3522/cm2522
"Sending scan data by E-mail" on page
TCP/IP Settings

E-mail TX (SMTP)

Create a certificate
S/MIME
SMTP Authentication?
No
SMTP Authentication
"Specifying general settings for TCP/IP-based communication" on page
"E-mail TX (SMTP)" on page
"Creating a certificate for this machine for SSL-based communication" on page
POP before SMTP?
Yes No
POP over SSL?
APOP?
POP over SSL
APOP Authentication
Finish
1-24.
1-23.
Yes
POP before SMTP
Yes No
1-2.
1
No
1-7.
1-31