Full Feature Address Mapping; Figure 67 Configuration > Nat > Full Feature > Address Mapping; Table 46 Configuration > Nat > Full Feature > Address Mapping - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide
Select a radio button and then click Edit to configure that server set.

9.3.4 Full Feature Address Mapping

Select Full Feature in
Figure 67 Configuration > NAT > Full Feature > Address Mapping
The following table describes the labels in this screen.
Table 46 Configuration > NAT > Full Feature > Address Mapping
LABEL
Index
Local Start IP
Local End IP
Global Start IP
Global End IP
141
Figure 64 on page 137
DESCRIPTION
This is the number of an individual entry. You may select a rule to edit by going to the
Edit Address Mapping screen for that rule.
This refers to the Inside Local Address (ILA), which is the starting local IP address.
Local IP addresses are N/A for Server port mapping.
This is the end Inside Local Address (ILA). If the rule is for all local IP addresses,
then this field displays 0.0.0.0 and 255.255.255.255 as the Local End IP address.
This field is N/A for One-to-One and Server mapping types.
This refers to the Inside Global IP Address (IGA). 0.0.0.0 is for a dynamic IP address
from your ISP with Many-to-One and Server mapping types.
This is the ending Inside Global Address (IGA), which is the starting global IP
address. This field is N/A for One-to-One, Many-to-One and Server mapping types.
and then click Edit to bring up the next screen.
Chapter 9 Configuration > NAT